Saramonic Blink500 ProX Wireless Microphone

The Saramonic Blink 500 ProX B1 is a 2.4 GHz wireless system that delivers exceptional, broadcast-quality sound to cameras, recorders, mixers, and other 3.5mm input devices. Ideal for content creators, filmmakers, journalists, vloggers, live streaming, and so much more. This ultra-portable and incredibly lightweight mic system comes with a wireless transmitter with a built-in mic, professional lavalier microphone, a dual-channel receiver, and an advanced portable charging carry case.

Upgraded in Every Way: The Industry Original Dual-Channel 2.4GHz System Just Keeps Getting Better
The Blink 500 ProX is the next generation of the immensely successful, and much copied Blink 500 Pro system. Combining the innovative features of the original Blink 500 Pro system with a smaller and lighter updated design, less latency, more reliability, upgraded OLED displays with real-time metering, longer battery life, higher resolution audio signal, wider frequency response, higher signal-to-noise ratio, and even more new features that set the ProX apart from the original Pro system and competitors. While still being incredibly easy to use.

Tiny and Light TX Transmitter, with Big and Heavy Features
The Blink 500 ProX TX transmitter features a built-in omnidirectional microphone with an impressive sensitivity of -39dB. Giving you professional dynamic sound quality on a transmitter small and light enough that you can easily clip it to a shirt or collar. The transmitter includes a lavalier microphone, allowing you to use it as a traditional belt pack transmitter for an even more discreet miking solution. A vivid OLED display gives real-time input level metering, and tactile input gain controls allow you to adjust the audio gain with ease. It also features a soft-touch mute button to quickly mute the transmitter for privacy.

Wireless Transmit Line-Level Audio and Other 3.5mm Microphones
The Blink 500 ProX TX transmitter also allows you to transmit line-level signal or microphone-level wirelessly and provides plug-in power to microphones. This stand-out feature makes the system tremendously versatile, allowing you to connect it to virtually any audio source. Switch the TX transmitter to line-level and connect it to mixers, music players, or any line-level device output you want to transmit wirelessly to the receiver. You can use the included SR-M1 lavalier, or you can add a headset microphone, a higher-end lavalier like the Saramonic DK3G, or even plug in a mini-shotgun microphone. Just about any 3.5mm microphone wired for standard TRS pin-out will work, and the adjustable mic gain, and input gain meter lets you get perfect levels every time.

Compact Dual Receiver with Headphone Out, OLED Display, Mono/Stereo Out and More
The Blink 500 ProX B1 system’s RX dual-channel receiver includes a 3.5mm TRS output cable. Allowing the system to work perfectly with cameras, recorders, mixers, and much more. The RX features a selectable Mono / Stereo output setting, giving you the ability to record each mic to separate channels when using an additional ProX TX transmitter (sold separately). Its 3.5mm headphone output with level control lets you monitor the sound in real-time, especially vital if your camera or device lacks a headphone output. It also features a vivid OLED display that shows you the RX’s battery life and headphone level, and the transmitter’s level meter, battery life, and wireless connection strength with just a glance. You can also easily adapt the receiver’s 3.5mm TRS output to Lightning, USB-C, USB, XLR, or TRRS devices with an inexpensive Saramonic audio adapter or interface (sold separately).

Remarkable Power and Convenience for Creators on the Move
The Blink 500 ProX B1 features a system battery life of up to 10-hours, nearly double the power of other 2.4GHz micro wireless systems. Giving users the ability to shoot for an entire day on one charge! It also includes a 2000mAh car case that provides an additional 2 and 1/2 full system charges anywhere. That gives you up to an incredible 35-hours of filming on a full system and case charge! Opening the charging case turns the system on and closing the case turns the system off, automatically. Because the transmitter and receiver also feature USB-C charging ports, they can be powered while in use or charged outside of the case using USB battery packs or a power supply for even more powering versatility.

RX Receiver Specifications
> Reception Type: 2.4GHz Digital Frequency
> Modulation: Digital Modulation
> Antenna: Built-In FPC Antenna
> Operating Range (Without Obstacles): Up to 328' (100m)
> Line Output Connector: 3.5mm TRS
> Output Level: -16.5dBu
> Output Mode Types: Mono / Stereo
> Headphone Output Connector: 3.5mm TRS
> Headphone Output Level: -6dBu
> Frequency Response 20Hz to 20KHz
> Digital Signal Resolution: 16bit / 48kHz
> Signal-to-Noise Ratio: ≥84dB
> Distortion: ≤0.1%
> System’s Voice Delay: ≤8ms
> High-contrast OLED Screen Resolution: 128 x 64 pixels
> Other Functions: Tactile Output Mute Function
> Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
> Battery Life: Approximately 10-hours
> Battery Specifications: 3.7V / 400mAh
> Weight: 1.08oz (30.5g)
> Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
> Operating Temperatures: 0° to 122°F (0°C to 50°C)
> Storage Temperatures: -50° to 122°F (–10°C to +50°C)

TX Transmitter Specifications:
> Transmission Type: 2.4GHz Digital Frequency
> Modulation: Digital Modulation
> Antenna: Built-In FPC Antenna
> Operating Range (Without Obstacles): Up to 328' (100m)
> RF Output Power: <10mW
> Frequency Response 20Hz to 20KHz
> Reference Audio Input Level: -20~-42dBv (MIC input, 0dB Attenuation)
> Input Connector: 3.5mm Mic In / Line In (Mic with Plug-in-Power)
> Built-in Microphone Polar Pattern: Omnidirectional
> Built-in Microphone Maximum SPL: 106dB
> Built-in Microphone Sensitivity: 39±2dB (Tested at 2V 2.2KΩ)
> Lavalier Microphone Maximum SPL: 120dB
> Lavalier Microphone Sensitivity: 39+/-2dB (0dB=1V/Pa,1kHz)
> Digital Signal Resolution: 16bit / 48kHz
> Signal-to-Noise Ratio: ≥84dB
> Distortion: ≤0.1%
> High-contrast OLED Screen Resolution: 128 x 64 pixels
> Other Functions: Tactile Microphone Mute Function
> Power Requirements: Built-in Li-ion Battery, USB-C DC 5V or Charging Contact
> Battery Life: Approximately 10-hours
> Battery Specifications: 3.7V / 400mAh
> Weight: 1.04oz (29.5g)
> Dimensions: 2.2 x 1.49 x 0.61” (56 × 38 × 15.5mm)
> Operating Temperatures: 0° to 122°F (0°C to 50°C)
> Storage Temperatures: -50° to 122°F (–10°C to +50°C)

Blink500 ProX B1
> 1 x Blink 500 ProX TX Transmitter with OLED Display, Built-In Microphone and Clip
> 1 x Blink 500 ProX RX Dual Receiver with OLED Display, Built-In Clip and Camera Shoe-Mount
> 1 × Blink 500 ProX B1 Portable Charging Carry Case
> 1 x SR-M1 Omnidirectional Lavalier Microphone
> 1 x Alligator-Style Lavalier Microphone Clip
> 1 x Foam Lavalier Windscreen
> 1 x Furry High-Wind Press-On Windscreen for Blink 500 ProX TX Transmitter
> 1 × Carry Pouch with Accessory Pocket
> 1 x 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable
> 1 x 1’ (30.5 cm) Gold-Plated USB-A to USB-C Charging Cable

Blink500 ProX B2
> 2 x Blink 500 ProX TX Transmitter with OLED Display, Built-In Microphone and Clip
> 1 x Blink 500 ProX RX Dual Receiver with OLED Display, Built-In Clip and Camera Shoe-Mount
> 1 × Blink 500 ProX B2 Portable Charging Carry Case
> 2 x SR-M1 Omnidirectional Lavalier Microphone
> 2 x Alligator-Style Lavalier Microphone Clip
> 2 x Foam Lavalier Windscreen
> 2 x Furry High-Wind Press-On Windscreen for Blink 500 ProX TX Transmitter
> 1 × Carry Pouch with Accessory Pocket
> 1 x 1’ (30.5 cm) Gold-Plated 3.5mm TRS to TRS Output Cable
> 1 x 1’ (30.5 cm) Gold-Plated USB-A to USB-C Charging Cable